Package SMESH_controls

Variables
	salome = smesh.salome
	mesh = SMESH_mechanic.mesh
tuple	aGroup = mesh.MakeGroup("Area > 100", smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, 100)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Taper > 3e-15", smesh.FACE, smesh.FT_Taper, smesh.FT_MoreThan, 3e-15)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", smesh.FACE, smesh.FT_AspectRatio, smesh.FT_MoreThan, 1.3)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Minimum Angle < 30", smesh.FACE, smesh.FT_MinimumAngle, smesh.FT_LessThan, 30)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Warp > 2e-13", smesh.FACE, smesh.FT_Warping, smesh.FT_MoreThan, 2e-13 )
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Skew > 18", smesh.FACE, smesh.FT_Skew, smesh.FT_MoreThan, 18 )
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Length > 10", smesh.FACE, smesh.FT_Length, smesh.FT_MoreThan, 10 )
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Borders at multi-connections = 2", smesh.EDGE, smesh.FT_MultiConnection, smesh.FT_EqualTo, 2)
tuple	anIds = aGroup.GetIDs()
	salome = smesh.salome
	mesh = SMESH_mechanic.mesh
tuple	aGroup = mesh.MakeGroup("Area > 100", smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, 100)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Taper > 3e-15", smesh.FACE, smesh.FT_Taper, smesh.FT_MoreThan, 3e-15)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", smesh.FACE, smesh.FT_AspectRatio, smesh.FT_MoreThan, 1.3)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Minimum Angle < 30", smesh.FACE, smesh.FT_MinimumAngle, smesh.FT_LessThan, 30)
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Warp > 2e-13", smesh.FACE, smesh.FT_Warping, smesh.FT_MoreThan, 2e-13 )
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Skew > 18", smesh.FACE, smesh.FT_Skew, smesh.FT_MoreThan, 18 )
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Length > 10", smesh.FACE, smesh.FT_Length, smesh.FT_MoreThan, 10 )
tuple	anIds = aGroup.GetIDs()
tuple	aGroup = mesh.MakeGroup("Borders at multi-connections = 2", smesh.EDGE, smesh.FT_MultiConnection, smesh.FT_EqualTo, 2)
tuple	anIds = aGroup.GetIDs()

---

Variable Documentation

SMESH_controls.salome = smesh.salome [static]

SMESH_controls.mesh = SMESH_mechanic.mesh [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Area > 100", smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, 100) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Taper > 3e-15", smesh.FACE, smesh.FT_Taper, smesh.FT_MoreThan, 3e-15) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", smesh.FACE, smesh.FT_AspectRatio, smesh.FT_MoreThan, 1.3) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Minimum Angle < 30", smesh.FACE, smesh.FT_MinimumAngle, smesh.FT_LessThan, 30) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Warp > 2e-13", smesh.FACE, smesh.FT_Warping, smesh.FT_MoreThan, 2e-13 ) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Skew > 18", smesh.FACE, smesh.FT_Skew, smesh.FT_MoreThan, 18 ) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Length > 10", smesh.FACE, smesh.FT_Length, smesh.FT_MoreThan, 10 ) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Borders at multi-connections = 2", smesh.EDGE, smesh.FT_MultiConnection, smesh.FT_EqualTo, 2) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

SMESH_controls.salome = smesh.salome [static]

SMESH_controls.mesh = SMESH_mechanic.mesh [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Area > 100", smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, 100) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Taper > 3e-15", smesh.FACE, smesh.FT_Taper, smesh.FT_MoreThan, 3e-15) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", smesh.FACE, smesh.FT_AspectRatio, smesh.FT_MoreThan, 1.3) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Minimum Angle < 30", smesh.FACE, smesh.FT_MinimumAngle, smesh.FT_LessThan, 30) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Warp > 2e-13", smesh.FACE, smesh.FT_Warping, smesh.FT_MoreThan, 2e-13 ) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Skew > 18", smesh.FACE, smesh.FT_Skew, smesh.FT_MoreThan, 18 ) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Length > 10", smesh.FACE, smesh.FT_Length, smesh.FT_MoreThan, 10 ) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

tuple SMESH_controls.aGroup = mesh.MakeGroup("Borders at multi-connections = 2", smesh.EDGE, smesh.FT_MultiConnection, smesh.FT_EqualTo, 2) [static]

tuple SMESH_controls.anIds = aGroup.GetIDs() [static]

Generated on Thu Apr 26 18:49:31 2007 for SALOME - SMESH - v.3.2.6 by  1.4.6