Personal tools
You are here: Home Forum Use Re: How can I create groups of faces in mesh module based on elipses geometry? I meshed partition_1 and don't have access to geometry groups.

Re: How can I create groups of faces in mesh module based on elipses geometry? I meshed partition_1 and don't have access to geometry groups.

Up to Use

Re: How can I create groups of faces in mesh module based on elipses geometry? I meshed partition_1 and don't have access to geometry groups.

Posted by Roman Król at April 02. 2012
Attachments

Re: How can I create groups of faces in mesh module based on elipses geometry? I meshed partition_1 and don't have access to geometry groups.

Posted by kees wouters at April 02. 2012

Hoi Roman

 

I think you have to perform a boolean operation on your ellipses because they overlap now and cannot form a closed area for the box.
See attached *.hdf zip, a bit larger with mesh now, for one bool elliptic area.

kind regards - kees

Attachments

Re: How can I create groups of faces in mesh module based on elipses geometry? I meshed partition_1 and don't have access to geometry groups.

Posted by kees wouters at April 02. 2012

Sorry for this reply

Mesh not posted because of too large a file.

So only geometry part post above.

 

 

Attachments
Powered by Ploneboard
Document Actions