Personal tools
You are here: Home Forum Use Sketching in Salome Ver 3.2.1

Sketching in Salome Ver 3.2.1

Up to Use
  • Sketching in Salome Ver 3.2.1

    Posted by JMB at September 02. 2006

    Hello all,

     

    I am trying to use the "Sketch" feature in Salome Ver 3.2.1 and it seems that it will only sketch in the X-Y plane.  I want to create a sketch in the X-Z plane but it seems to flip back to the X-Y plane when I do that.  Is this normal behavior or is it a bug?

     

    Thanks

    JMB

    • Re: Sketching in Salome Ver 3.2.1

      Posted by Igor Nazarov at September 06. 2006
      Hi,

      Please define working plane X-Z before usage "Sketch" feature. And contour will be created in X-Z plane.

      Bugmaster

      • Re: Sketching in Salome Ver 3.2.1

        Posted by JMB at September 09. 2006
        Igor Nazarov wrote:
        Hi,
        Please define working plane X-Z before usage "Sketch" feature. And contour will be created in X-Z plane.
        Bugmaster


        Igor,

        Thank you for your reply.  I just could not find the correct option (or icon) in the menu.  Now I see that it is the icon "Create Working Plane" -> option: "Select a Plane" also documented in ".../salome_3.2.1/GEOM_3.2.1/doc/salome/gui/GEOM/working_plane.htm"

        JMB
Powered by Ploneboard
Document Actions