Skip to content. | Skip to navigation

Sections

Personal tools

You are here: Home → Forum → How to use Salome? → element reference for the mesh module

Recent messages: Getting Centroid of a cell Extension of the platform; Salome v6.6.0 won't start under Opensuse 12.3 Install & build; MEDLoader very slow in reading mesh Extension of the platform; Separate GUI client and CAD/MESH server Install & build; Building a mesh for two intersecting spheres Use; More…

element reference for the mesh module

Up to How to use Salome?

element reference for the mesh module
Posted by Umut Tabak at June 27. 2009

Dear developers,

As a new user, Thanks for the high quality software and the nice, user friendly gui which makes life easy for our academic and even industrial trials.
I was reading to be able to get an idea on the Salome interface, and capabilities on the geometry/modelling and post-processing but I could not see a referece page for the finite elements in the mesh module gui documentation. And I realized that node ordering of the quad4 elements is different than the ordering of Gmsh given by(exported a mesh in Salome as Unv and read that in Gmsh to be able to use that mesh as an input for my MATLAB interface vibroacoustic solver.)
    3 ===2
     |         |
     |         |
     0===1
I am sure there should be a reference, but I could not manage to reach that yet. Any help is appreceiated.
Thanks and best,
Umut
- Re: element reference for the mesh module
  Posted by Christophe Bourcier at June 28. 2009
  
  Hi
  
  Here is the reference documentation for the connectivity of the elements in MED. It should be the same in SMESH.
  
  http://www.code-aster.org/outils/med/html/modele_de_donnees.html#3.
  
  Christophe

Powered by Ploneboard

Document Actions