Personal tools
You are here: Home Forum Extension of the platform Salome 5.1.3 with aster 10.1.0 module

Salome 5.1.3 with aster 10.1.0 module

Up to Extension of the platform

Salome 5.1.3 with aster 10.1.0 module

Posted by wwiki at January 11. 2010

Hello world,

I would declare aster 10.1.0 as module of salome 5.1.3.

I read documentations :

* D9.10.01 Descriptif du module Aster de Salomé
* doc5.1.3/HELLO/doc/salome/gui/HELLO/index.html
* doc5.1.3/PYHELLO/doc/salome/gui/PYHELLO/index.html

I'm really lost . 

I don't understand how aster compilation will produce aster module.

But  setup.cfg contains

# Interface between Code_Aster and Salome

_install_omniORB   = True

_install_omniORBpy = True

_install_pylotage  = True

# Salome version supported by pylotage

SALOME_VERSION = 'DEFAULT'    # DEFAULT means the last one supported by pylotage

 

Are these documents still valid for the creation of this module ?

 

Help is welcome.

 

Re: Salome 5.1.3 with aster 10.1.0 module

Posted by Michael Kiefer at January 14. 2010
I have the same problem. My project is too big for Salome-Meca which is 32 bit only, so I installed Salome-5.1.3 and the new stable code aster. How can I make them use one another?

Re: Salome 5.1.3 with aster 10.1.0 module

Posted by DAVID Gilles at January 14. 2010

Hello,

ASTER module in Salome is being updated by the developers to be compliant in the new V5 version of Salome.

It is a complicated task, so I think you should just wait for it to be available. Sorry I can't tell you when it will be released as I'm not part of the ASTER team.

Meanwhile you can use Salome V5.1.3 for pre-post process and export/import the MED files in Salome-Meca 2009.1 to use them in Code-Aster STA9.4.

Regards,

Gilles

Re: Salome 5.1.3 with aster 10.1.0 module

Posted by wwiki at January 15. 2010

Thank you verry much for your answer.

If the team of development can give a date. Thus, I know if I have the time to do this work or not.

Now , I have again read
http://docs.salome-platform.org/salome_5_1_3/samples/hello/user/index.html

I mean that if I follow this work , aster 10.1.0 is declared as module of salome 5.1.3 .

Best Regards.

 

Re: Salome 5.1.3 with aster 10.1.0 module

Posted by DAVID Gilles at January 15. 2010

Hello,

I think you make a confusion between Code-Aster and the ASTER module in Salome.

Code-Aster is the solver, its version is 10.10.

ASTER module is the encapsulation of Code-Aster in Salome. The most recent ASTER module works only on Salome V4.1.5 and Code-Aster 9.

The big work is to develop the new ASTER module for Code-Aster 10.10 and Salome V5.1.X. It is not just a matter of declaring Code-Aster 10.10 as a module of Salome, some coding must be done. And this coding part is very long and time consuming. This is what is currently done by the Salome-Meca team.

BUT:

If you want to train yourself in the developement of a module in Salome with Code-Aster as a basis, please don't hesitate. The link of the documentation you mentionned is a good starting point. to developped a module written in C++. You can also develop a module in Python, the related documentation is located in the PYHELLO module.

 

Best Regards,

Gilles

Re: Salome 5.1.3 with aster 10.1.0 module

Posted by wwiki at January 18. 2010

Hello Gilles ,

Thank you for your answer.

I will try to develop ASTER module. It's a little strong . But ...

Powered by Ploneboard
Document Actions