/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/tcl-8.5.8.tar.gz -C /home/develop/salome_6.6.0/tcltk-8.5.8_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/tk-8.5.8.tar.gz -C /home/develop/salome_6.6.0/tcltk-8.5.8_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/tclx-8.4.0.tar.gz -C /home/develop/salome_6.6.0/tcltk-8.5.8_SRC

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tcl-8.5.8_SRC/unix -> ./configure --enable-gcc --enable-shared --enable-threads --prefix=/home/develop/salome_6.6.0/tcltk-8.5.8 >> /home/develop/salome_6.6.0/tcltk-8.5.8/CONFIGURE.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tcl-8.5.8_SRC/unix -> make >> /home/develop/salome_6.6.0/tcltk-8.5.8/MAKE.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tcl-8.5.8_SRC/unix -> make install >> /home/develop/salome_6.6.0/tcltk-8.5.8/MAKEINSTALL.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tk-8.5.8_SRC/unix -> ./configure --enable-gcc --enable-shared --enable-threads --prefix=/home/develop/salome_6.6.0/tcltk-8.5.8 --with-tcl=/home/develop/salome_6.6.0/tcltk-8.5.8/lib >> /home/develop/salome_6.6.0/tcltk-8.5.8/CONFIGURE.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tk-8.5.8_SRC/unix -> make >> /home/develop/salome_6.6.0/tcltk-8.5.8/MAKE.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tk-8.5.8_SRC/unix -> make install >> /home/develop/salome_6.6.0/tcltk-8.5.8/MAKEINSTALL.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tclx-8.4.0_SRC -> ./configure --enable-gcc --enable-shared --enable-threads --prefix=/home/develop/salome_6.6.0/tcltk-8.5.8 --with-tcl=/home/develop/salome_6.6.0/tcltk-8.5.8/lib --with-tk=/home/develop/salome_6.6.0/tcltk-8.5.8/lib >> /home/develop/salome_6.6.0/tcltk-8.5.8/CONFIGURE.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tclx-8.4.0_SRC -> make >> /home/develop/salome_6.6.0/tcltk-8.5.8/MAKE.LOG

/home/develop/salome_6.6.0/tcltk-8.5.8_SRC/tclx-8.4.0_SRC -> make install >> /home/develop/salome_6.6.0/tcltk-8.5.8/MAKEINSTALL.LOG

/home/develop/salome_6.6.0/Python-2.6.6_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/Python-2.6.6 --with-threads --with-cxx=/usr/bin/g++ --enable-shared --without-test --with-libs=-lstdc++ --without-pymalloc CFLAGS=-m64 CXXFLAGS=-m64 CPPFLAGS=-I/home/develop/salome_6.6.0/tcltk-8.5.8/include LDFLAGS=-L/home/develop/salome_6.6.0/tcltk-8.5.8/lib >> /home/develop/salome_6.6.0/Python-2.6.6/CONFIGURE.LOG

/home/develop/salome_6.6.0/Python-2.6.6_SRC -> make >> /home/develop/salome_6.6.0/Python-2.6.6/MAKE.LOG

/home/develop/salome_6.6.0/Python-2.6.6_SRC -> make install >> /home/develop/salome_6.6.0/Python-2.6.6/MAKINSTALL.LOG

/home/develop/salome_6.6.0/qt-4.6.3_SRC -> ./configure -prefix /home/develop/salome_6.6.0/qt-4.6.3 -no-separate-debug-info -release -opensource -confirm-license >> /home/develop/salome_6.6.0/qt-4.6.3/CONFIGURE.LOG

/home/develop/salome_6.6.0/qt-4.6.3_SRC -> make >> /home/develop/salome_6.6.0/qt-4.6.3/MAKE.LOG

/home/develop/salome_6.6.0/qt-4.6.3_SRC -> make install >> /home/develop/salome_6.6.0/qt-4.6.3/MAKEINSTALL.LOG

/home/develop/salome_6.6.0/sip-4.13.2_SRC -> python ./configure.py -b /home/develop/salome_6.6.0/sip-4.13.2/bin -d /home/develop/salome_6.6.0/sip-4.13.2/lib/python2.6/site-packages -e /home/develop/salome_6.6.0/sip-4.13.2/include/python2.6 -v /home/develop/salome_6.6.0/sip-4.13.2/sip -p linux-g++-64 >> /home/develop/salome_6.6.0/sip-4.13.2/CONFIGURE.LOG

/home/develop/salome_6.6.0/sip-4.13.2_SRC -> make >> /home/develop/salome_6.6.0/sip-4.13.2/MAKE.LOG

/home/develop/salome_6.6.0/sip-4.13.2_SRC -> make install >> /home/develop/salome_6.6.0/sip-4.13.2/INSTALL.LOG

patching file sip/QtDBus/qpydbuspendingreply.sip

patching file sip/QtDBus/qpydbusreply.sip

/home/develop/salome_6.6.0/PyQt-4.9.1_SRC -> python ./configure.py -b /home/develop/salome_6.6.0/PyQt-4.9.1/bin -d /home/develop/salome_6.6.0/PyQt-4.9.1 -v /home/develop/salome_6.6.0/PyQt-4.9.1/sip -p /home/develop/salome_6.6.0/PyQt-4.9.1/plugins --confirm-license >> /home/develop/salome_6.6.0/PyQt-4.9.1/CONFIGURE.LOG

/home/develop/salome_6.6.0/PyQt-4.9.1_SRC -> make >> /home/develop/salome_6.6.0/PyQt-4.9.1/MAKE.LOG

/home/develop/salome_6.6.0/PyQt-4.9.1_SRC -> make install >> /home/develop/salome_6.6.0/PyQt-4.9.1/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/QScintilla-2.6.1.tar.gz -C /home/develop/salome_6.6.0

patching file Qt4/ListBoxQt.cpp

/home/develop/salome_6.6.0/QScintilla-2.6.1_SRC/Qt4 -> make >> /home/develop/salome_6.6.0/QScintilla-2.6.1/MAKE.LOG

/home/develop/salome_6.6.0/QScintilla-2.6.1_SRC/Qt4 -> make install >> /home/develop/salome_6.6.0/QScintilla-2.6.1/MAKEINSTALL.LOG

/home/develop/salome_6.6.0/QScintilla-2.6.1_SRC/Python -> python configure.py -a /home/develop/salome_6.6.0/QScintilla-2.6.1/qsci -n /home/develop/salome_6.6.0/QScintilla-2.6.1/include -o /home/develop/salome_6.6.0/QScintilla-2.6.1/lib -p 4 -d /home/develop/salome_6.6.0/PyQt-4.9.1/PyQt4 -v /home/develop/salome_6.6.0/PyQt-4.9.1/sip >> /home/develop/salome_6.6.0/QScintilla-2.6.1/PYCONFIGURE.LOG

/home/develop/salome_6.6.0/QScintilla-2.6.1_SRC/Python -> make >> /home/develop/salome_6.6.0/QScintilla-2.6.1/PYMAKE.LOG

/home/develop/salome_6.6.0/QScintilla-2.6.1_SRC/Python -> make install >> /home/develop/salome_6.6.0/QScintilla-2.6.1/PYMAKEINSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xzf /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/boost-1.49.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/boost-1.49.0_SRC/tools/build/v2/engine -> env BOOST_BUILD_PATH=/home/develop/salome_6.6.0/boost-1.49.0_SRC ./build.sh --debug --with-python=/home/develop/salome_6.6.0/Python-2.6.6 --with-python-version=2.6 >> /home/develop/salome_6.6.0/boost-1.49.0/BUILD.LOG

/home/develop/salome_6.6.0/boost-1.49.0_SRC -> ./tools/build/v2/engine/bin.linuxx86_64.debug/bjam toolset=gcc variant=release runtime-link=shared threading=multi -sBOOST_ALL_DYN_LINK=1 -sNO_BZIP2=1 --prefix=/home/develop/salome_6.6.0/boost-1.49.0 --builddir=/home/develop/salome_6.6.0/boost-1.49.0_SRC install >> /home/develop/salome_6.6.0/boost-1.49.0/INSTALL.LOG

/home/develop/salome_6.6.0/swig-1.3.40_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/swig-1.3.40 >> /home/develop/salome_6.6.0/swig-1.3.40/CONFIGURE.LOG

/home/develop/salome_6.6.0/swig-1.3.40_SRC -> make >> /home/develop/salome_6.6.0/swig-1.3.40/MAKE.LOG

/home/develop/salome_6.6.0/swig-1.3.40_SRC -> make install >> /home/develop/salome_6.6.0/swig-1.3.40/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/freetype-2.4.10.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/freetype-2.4.10_SRC -> ./configure CFLAGS='-m64 -fPIC' CPPFLAGS='-m64 -fPIC' --prefix=/home/develop/salome_6.6.0/freetype-2.4.10 >> /home/develop/salome_6.6.0/freetype-2.4.10/CONFIGURE.LOG

/home/develop/salome_6.6.0/freetype-2.4.10_SRC -> make >> /home/develop/salome_6.6.0/freetype-2.4.10/MAKE.LOG

/home/develop/salome_6.6.0/freetype-2.4.10_SRC -> make install >> /home/develop/salome_6.6.0/freetype-2.4.10/INSTALL.LOG

/home/develop/salome_6.6.0/ftgl-2.1.3_SRC -> ./configure --enable-shared=yes --prefix=/home/develop/salome_6.6.0/ftgl-2.1.3 --with-ft-prefix=/home/develop/salome_6.6.0/freetype-2.4.10 --with-gl-inc=/usr/include --with-gl-lib=/usr/lib64 >> /home/develop/salome_6.6.0/ftgl-2.1.3/CONFIGURE.LOG

/home/develop/salome_6.6.0/ftgl-2.1.3_SRC -> make >> /home/develop/salome_6.6.0/ftgl-2.1.3/MAKE.LOG

/home/develop/salome_6.6.0/ftgl-2.1.3_SRC -> make install >> /home/develop/salome_6.6.0/ftgl-2.1.3/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/freeimage-3.14.1.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/freeimage-3.14.1_SRC -> make -f Makefile.gnu >> /home/develop/salome_6.6.0/freeimage-3.14.1/MAKE.LOG

/home/develop/salome_6.6.0/freeimage-3.14.1_SRC -> make -f Makefile.gnu DESTDIR=/home/develop/salome_6.6.0/freeimage-3.14.1 install >> /home/develop/salome_6.6.0/freeimage-3.14.1/INSTALL.LOG

rm -f core Dist/*.* u2dtmp* ./Source/FreeImage/BitmapAccess.o ./Source/FreeImage/ColorLookup.o ./Source/FreeImage/FreeImage.o ./Source/FreeImage/FreeImageC.o ./Source/FreeImage/FreeImageIO.o ./Source/FreeImage/GetType.o ./Source/FreeImage/MemoryIO.o ./Source/FreeImage/PixelAccess.o ././Source/FreeImage/J2KHelper.o ./Source/FreeImage/Plugin.o ./Source/FreeImage/PluginBMP.o ./Source/FreeImage/PluginCUT.o ./Source/FreeImage/PluginDDS.o ././Source/FreeImage/PluginEXR.o ./Source/FreeImage/PluginG3.o ./Source/FreeImage/PluginGIF.o ./Source/FreeImage/PluginHDR.o ./Source/FreeImage/PluginICO.o ./Source/FreeImage/PluginIFF.o ././Source/FreeImage/PluginJ2K.o ././Source/FreeImage/PluginJP2.o ./Source/FreeImage/PluginJPEG.o ./Source/FreeImage/PluginKOALA.o ./Source/FreeImage/PluginMNG.o ./Source/FreeImage/PluginPCD.o ./Source/FreeImage/PluginPCX.o ././Source/FreeImage/PluginPFM.o ././Source/FreeImage/PluginPICT.o ./Source/FreeImage/PluginPNG.o ./Source/FreeImage/PluginPNM.o ./Source/FreeImage/PluginPSD.o ./Source/FreeImage/PluginRAS.o ././Source/FreeImage/PluginRAW.o ./Source/FreeImage/PluginSGI.o ./Source/FreeImage/PluginTARGA.o ./Source/FreeImage/PluginTIFF.o ./Source/FreeImage/PluginWBMP.o ./Source/FreeImage/PluginXBM.o ./Source/FreeImage/PluginXPM.o ././Source/FreeImage/PSDParser.o ././Source/FreeImage/TIFFLogLuv.o ./Source/FreeImage/Conversion.o ./Source/FreeImage/Conversion16_555.o ./Source/FreeImage/Conversion16_565.o ./Source/FreeImage/Conversion24.o ./Source/FreeImage/Conversion32.o ./Source/FreeImage/Conversion4.o ./Source/FreeImage/Conversion8.o ././Source/FreeImage/ConversionFloat.o ./Source/FreeImage/ConversionRGBF.o ./Source/FreeImage/ConversionType.o ./Source/FreeImage/Halftoning.o ./Source/FreeImage/tmoColorConvert.o ./Source/FreeImage/tmoDrago03.o ././Source/FreeImage/tmoFattal02.o ./Source/FreeImage/tmoReinhard05.o ./Source/FreeImage/ToneMapping.o ./Source/FreeImage/NNQuantizer.o ./Source/FreeImage/WuQuantizer.o ././Source/DeprecationManager/Deprecated.o ./Source/DeprecationManager/DeprecationMgr.o ./Source/FreeImage/CacheFile.o ./Source/FreeImage/MultiPage.o ./Source/FreeImage/ZLibInterface.o ./Source/Metadata/Exif.o ./Source/Metadata/FIRational.o ./Source/Metadata/FreeImageTag.o ./Source/Metadata/IPTC.o ./Source/Metadata/TagConversion.o ./Source/Metadata/TagLib.o ./Source/Metadata/XTIFF.o ././Source/FreeImageToolkit/Background.o ./Source/FreeImageToolkit/BSplineRotate.o ./Source/FreeImageToolkit/Channels.o ./Source/FreeImageToolkit/ClassicRotate.o ./Source/FreeImageToolkit/Colors.o ./Source/FreeImageToolkit/CopyPaste.o ./Source/FreeImageToolkit/Display.o ./Source/FreeImageToolkit/Flip.o ./Source/FreeImageToolkit/JPEGTransform.o ././Source/FreeImageToolkit/MultigridPoissonSolver.o ./Source/FreeImageToolkit/Rescale.o ./Source/FreeImageToolkit/Resize.o Source/LibJPEG/./jaricom.o Source/LibJPEG/jcapimin.o Source/LibJPEG/jcapistd.o Source/LibJPEG/./jcarith.o Source/LibJPEG/jccoefct.o Source/LibJPEG/jccolor.o Source/LibJPEG/jcdctmgr.o Source/LibJPEG/jchuff.o Source/LibJPEG/jcinit.o Source/LibJPEG/jcmainct.o Source/LibJPEG/jcmarker.o Source/LibJPEG/jcmaster.o Source/LibJPEG/jcomapi.o Source/LibJPEG/jcparam.o Source/LibJPEG/jcprepct.o Source/LibJPEG/jcsample.o Source/LibJPEG/jctrans.o Source/LibJPEG/jdapimin.o Source/LibJPEG/jdapistd.o Source/LibJPEG/./jdarith.o Source/LibJPEG/jdatadst.o Source/LibJPEG/jdatasrc.o Source/LibJPEG/jdcoefct.o Source/LibJPEG/jdcolor.o Source/LibJPEG/jddctmgr.o Source/LibJPEG/jdhuff.o Source/LibJPEG/jdinput.o Source/LibJPEG/jdmainct.o Source/LibJPEG/jdmarker.o Source/LibJPEG/jdmaster.o Source/LibJPEG/jdmerge.o Source/LibJPEG/jdpostct.o Source/LibJPEG/jdsample.o Source/LibJPEG/jdtrans.o Source/LibJPEG/jerror.o Source/LibJPEG/jfdctflt.o Source/LibJPEG/jfdctfst.o Source/LibJPEG/jfdctint.o Source/LibJPEG/jidctflt.o Source/LibJPEG/jidctfst.o Source/LibJPEG/jidctint.o Source/LibJPEG/jmemmgr.o Source/LibJPEG/jmemnobs.o Source/LibJPEG/jquant1.o Source/LibJPEG/jquant2.o Source/LibJPEG/jutils.o Source/LibJPEG/transupp.o Source/LibMNG/libmng_callback_xs.o Source/LibMNG/libmng_chunk_descr.o Source/LibMNG/libmng_chunk_io.o Source/LibMNG/libmng_chunk_prc.o Source/LibMNG/libmng_chunk_xs.o Source/LibMNG/libmng_cms.o Source/LibMNG/libmng_display.o Source/LibMNG/libmng_dither.o Source/LibMNG/libmng_error.o Source/LibMNG/libmng_filter.o Source/LibMNG/libmng_hlapi.o Source/LibMNG/libmng_jpeg.o Source/LibMNG/libmng_object_prc.o Source/LibMNG/libmng_pixels.o Source/LibMNG/libmng_prop_xs.o Source/LibMNG/libmng_read.o Source/LibMNG/libmng_trace.o Source/LibMNG/libmng_write.o Source/LibMNG/libmng_zlib.o Source/LibPNG/./png.o Source/LibPNG/./pngerror.o Source/LibPNG/./pngget.o Source/LibPNG/./pngmem.o Source/LibPNG/./pngpread.o Source/LibPNG/./pngread.o Source/LibPNG/./pngrio.o Source/LibPNG/./pngrtran.o Source/LibPNG/./pngrutil.o Source/LibPNG/./pngset.o Source/LibPNG/./pngtrans.o Source/LibPNG/./pngwio.o Source/LibPNG/./pngwrite.o Source/LibPNG/./pngwtran.o Source/LibPNG/./pngwutil.o Source/LibTIFF/tif_aux.o Source/LibTIFF/tif_close.o Source/LibTIFF/tif_codec.o Source/LibTIFF/tif_color.o Source/LibTIFF/tif_compress.o Source/LibTIFF/tif_dir.o Source/LibTIFF/tif_dirinfo.o Source/LibTIFF/tif_dirread.o Source/LibTIFF/tif_dirwrite.o Source/LibTIFF/tif_dumpmode.o Source/LibTIFF/tif_error.o Source/LibTIFF/tif_extension.o Source/LibTIFF/tif_fax3.o Source/LibTIFF/tif_fax3sm.o Source/LibTIFF/tif_flush.o Source/LibTIFF/tif_getimage.o Source/LibTIFF/tif_jpeg.o Source/LibTIFF/tif_luv.o Source/LibTIFF/tif_lzw.o Source/LibTIFF/tif_next.o Source/LibTIFF/./tif_ojpeg.o Source/LibTIFF/tif_open.o Source/LibTIFF/tif_packbits.o Source/LibTIFF/tif_pixarlog.o Source/LibTIFF/tif_predict.o Source/LibTIFF/tif_print.o Source/LibTIFF/tif_read.o Source/LibTIFF/tif_strip.o Source/LibTIFF/tif_swab.o Source/LibTIFF/tif_thunder.o Source/LibTIFF/tif_tile.o Source/LibTIFF/tif_version.o Source/LibTIFF/tif_warning.o Source/LibTIFF/tif_write.o Source/LibTIFF/tif_zip.o Source/ZLib/./adler32.o Source/ZLib/./compress.o Source/ZLib/./crc32.o Source/ZLib/./deflate.o Source/ZLib/./infback.o Source/ZLib/./inffast.o Source/ZLib/./inflate.o Source/ZLib/./inftrees.o Source/ZLib/./trees.o Source/ZLib/./uncompr.o Source/ZLib/./zutil.o Source/LibOpenJPEG/bio.o Source/LibOpenJPEG/cio.o Source/LibOpenJPEG/dwt.o Source/LibOpenJPEG/event.o Source/LibOpenJPEG/image.o Source/LibOpenJPEG/j2k.o Source/LibOpenJPEG/j2k_lib.o Source/LibOpenJPEG/jp2.o Source/LibOpenJPEG/jpt.o Source/LibOpenJPEG/mct.o Source/LibOpenJPEG/mqc.o Source/LibOpenJPEG/openjpeg.o Source/LibOpenJPEG/pi.o Source/LibOpenJPEG/raw.o Source/LibOpenJPEG/t1.o Source/LibOpenJPEG/t2.o Source/LibOpenJPEG/tcd.o Source/LibOpenJPEG/tgt.o Source/OpenEXR/./IlmImf/ImfAttribute.o Source/OpenEXR/./IlmImf/ImfB44Compressor.o Source/OpenEXR/./IlmImf/ImfBoxAttribute.o Source/OpenEXR/./IlmImf/ImfChannelList.o Source/OpenEXR/./IlmImf/ImfChannelListAttribute.o Source/OpenEXR/./IlmImf/ImfChromaticities.o Source/OpenEXR/./IlmImf/ImfChromaticitiesAttribute.o Source/OpenEXR/./IlmImf/ImfCompressionAttribute.o Source/OpenEXR/./IlmImf/ImfCompressor.o Source/OpenEXR/./IlmImf/ImfConvert.o Source/OpenEXR/./IlmImf/ImfCRgbaFile.o Source/OpenEXR/./IlmImf/ImfDoubleAttribute.o Source/OpenEXR/./IlmImf/ImfEnvmap.o Source/OpenEXR/./IlmImf/ImfEnvmapAttribute.o Source/OpenEXR/./IlmImf/ImfFloatAttribute.o Source/OpenEXR/./IlmImf/ImfFrameBuffer.o Source/OpenEXR/./IlmImf/ImfFramesPerSecond.o Source/OpenEXR/./IlmImf/ImfHeader.o Source/OpenEXR/./IlmImf/ImfHuf.o Source/OpenEXR/./IlmImf/ImfInputFile.o Source/OpenEXR/./IlmImf/ImfIntAttribute.o Source/OpenEXR/./IlmImf/ImfIO.o Source/OpenEXR/./IlmImf/ImfKeyCode.o Source/OpenEXR/./IlmImf/ImfKeyCodeAttribute.o Source/OpenEXR/./IlmImf/ImfLineOrderAttribute.o Source/OpenEXR/./IlmImf/ImfLut.o Source/OpenEXR/./IlmImf/ImfMatrixAttribute.o Source/OpenEXR/./IlmImf/ImfMisc.o Source/OpenEXR/./IlmImf/ImfOpaqueAttribute.o Source/OpenEXR/./IlmImf/ImfOutputFile.o Source/OpenEXR/./IlmImf/ImfPizCompressor.o Source/OpenEXR/./IlmImf/ImfPreviewImage.o Source/OpenEXR/./IlmImf/ImfPreviewImageAttribute.o Source/OpenEXR/./IlmImf/ImfPxr24Compressor.o Source/OpenEXR/./IlmImf/ImfRational.o Source/OpenEXR/./IlmImf/ImfRationalAttribute.o Source/OpenEXR/./IlmImf/ImfRgbaFile.o Source/OpenEXR/./IlmImf/ImfRgbaYca.o Source/OpenEXR/./IlmImf/ImfRleCompressor.o Source/OpenEXR/./IlmImf/ImfScanLineInputFile.o Source/OpenEXR/./IlmImf/ImfStandardAttributes.o Source/OpenEXR/./IlmImf/ImfStdIO.o Source/OpenEXR/./IlmImf/ImfStringAttribute.o Source/OpenEXR/./IlmImf/ImfStringVectorAttribute.o Source/OpenEXR/./IlmImf/ImfTestFile.o Source/OpenEXR/./IlmImf/ImfThreading.o Source/OpenEXR/./IlmImf/ImfTileDescriptionAttribute.o Source/OpenEXR/./IlmImf/ImfTiledInputFile.o Source/OpenEXR/./IlmImf/ImfTiledMisc.o Source/OpenEXR/./IlmImf/ImfTiledOutputFile.o Source/OpenEXR/./IlmImf/ImfTiledRgbaFile.o Source/OpenEXR/./IlmImf/ImfTileOffsets.o Source/OpenEXR/./IlmImf/ImfTimeCode.o Source/OpenEXR/./IlmImf/ImfTimeCodeAttribute.o Source/OpenEXR/./IlmImf/ImfVecAttribute.o Source/OpenEXR/./IlmImf/ImfVersion.o Source/OpenEXR/./IlmImf/ImfWav.o Source/OpenEXR/./IlmImf/ImfZipCompressor.o Source/OpenEXR/./Imath/ImathBox.o Source/OpenEXR/./Imath/ImathColorAlgo.o Source/OpenEXR/./Imath/ImathFun.o Source/OpenEXR/./Imath/ImathMatrixAlgo.o Source/OpenEXR/./Imath/ImathRandom.o Source/OpenEXR/./Imath/ImathShear.o Source/OpenEXR/./Imath/ImathVec.o Source/OpenEXR/./Iex/IexBaseExc.o Source/OpenEXR/./Iex/IexThrowErrnoExc.o Source/OpenEXR/./Half/half.o Source/OpenEXR/./IlmThread/IlmThread.o Source/OpenEXR/./IlmThread/IlmThreadMutex.o Source/OpenEXR/./IlmThread/IlmThreadPool.o Source/OpenEXR/./IlmThread/IlmThreadSemaphore.o Source/LibRawLite/./internal/dcraw_common.o Source/LibRawLite/./internal/dcraw_fileio.o Source/LibRawLite/./src/libraw_c_api.o Source/LibRawLite/./src/libraw_cxx.o Wrapper/FreeImagePlus/src/fipImage.o Wrapper/FreeImagePlus/src/fipMemoryIO.o Wrapper/FreeImagePlus/src/fipMetadataFind.o Wrapper/FreeImagePlus/src/fipMultiPage.o Wrapper/FreeImagePlus/src/fipTag.o Wrapper/FreeImagePlus/src/fipWinImage.o Wrapper/FreeImagePlus/src/FreeImagePlus.o libfreeimageplus.a libfreeimageplus-3.14.1.so libfreeimageplus.so

/home/develop/salome_6.6.0/freeimage-3.14.1_SRC -> make -f Makefile.fip >> /home/develop/salome_6.6.0/freeimage-3.14.1/MAKEPLUS.LOG

/home/develop/salome_6.6.0/freeimage-3.14.1_SRC -> make -f Makefile.fip DESTDIR=/home/develop/salome_6.6.0/freeimage-3.14.1 install >> /home/develop/salome_6.6.0/freeimage-3.14.1/INSTALLPLUS.LOG

/home/develop/salome_6.6.0/cmake-2.8.7_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/cmake-2.8.7 >> /home/develop/salome_6.6.0/cmake-2.8.7/CONFIGURE.LOG

/home/develop/salome_6.6.0/cmake-2.8.7_SRC -> make >> /home/develop/salome_6.6.0/cmake-2.8.7/MAKE.LOG

/home/develop/salome_6.6.0/cmake-2.8.7_SRC -> make install >> /home/develop/salome_6.6.0/cmake-2.8.7/MAKEINSTALL.LOG

/home/develop/salome_6.6.0/gl2ps-1.3.5_SRC -> cmake -DCMAKE_INSTALL_PREFIX=/home/develop/salome_6.6.0/gl2ps-1.3.5 -DCMAKE_BUILD_TYPE=Release >> /home/develop/salome_6.6.0/gl2ps-1.3.5/CONFIGURE.LOG

/home/develop/salome_6.6.0/gl2ps-1.3.5_SRC -> make >> /home/develop/salome_6.6.0/gl2ps-1.3.5/MAKE.LOG

/home/develop/salome_6.6.0/gl2ps-1.3.5_SRC -> make install >> /home/develop/salome_6.6.0/gl2ps-1.3.5/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/BINARIES/Red_Hat_Enterprise_WS_4_64bit/tbb30_018oss.tar.gz -C /home/develop/salome_6.6.0/tbb30_018oss

+++++++++++ build_configure

/home/develop/salome_6.6.0/OCCT-6.5.4_SRC -> ./build_configure >> /home/develop/salome_6.6.0/OCCT-6.5.4/BUILDCONFIGURE.LOG

+++++++++++ configure

/home/develop/salome_6.6.0/OCCT-6.5.4_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/OCCT-6.5.4 --with-tcl=/home/develop/salome_6.6.0/tcltk-8.5.8/lib --with-tk=/home/develop/salome_6.6.0/tcltk-8.5.8/lib --with-tbb-include=/home/develop/salome_6.6.0/tbb30_018oss/include --with-tbb-library=/home/develop/salome_6.6.0/tbb30_018oss/lib/intel64/cc4.1.0_libc2.4_kernel2.6.16.21 --with-freetype=/home/develop/salome_6.6.0/freetype-2.4.10 --with-ftgl=/home/develop/salome_6.6.0/ftgl-2.1.3 --with-freeimage=/home/develop/salome_6.6.0/freeimage-3.14.1 --with-gl2ps=/home/develop/salome_6.6.0/gl2ps-1.3.5 --disable-debug --enable-production >> /home/develop/salome_6.6.0/OCCT-6.5.4/CONFIGURE.LOG

+++++++++++ make

/home/develop/salome_6.6.0/OCCT-6.5.4_SRC -> make -j4 install-strip >> /home/develop/salome_6.6.0/OCCT-6.5.4/MAKE.LOG

+++++++++++ fix libGL dependencies

/home/develop/salome_6.6.0/qwt-5.2.1_SRC -> make >> /home/develop/salome_6.6.0/qwt-5.2.1/MAKE.LOG

/home/develop/salome_6.6.0/qwt-5.2.1_SRC -> make install >> /home/develop/salome_6.6.0/qwt-5.2.1/MAKE_INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/omniORB-4.1.6.tar.gz -C /home/develop/salome_6.6.0/omniORB-4.1.6_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/omniORBpy-3.6.tar.gz -C /home/develop/salome_6.6.0/omniORB-4.1.6_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/omniNotify-2.1.tar.gz -C /home/develop/salome_6.6.0/omniORB-4.1.6_SRC

patching file examples/all_cosnotify_clients.cc

patching file examples/demo_add_filter.cc

patching file examples/demo_offer_change.cc

patching file examples/demo_subscription_change.cc

patching file examples/get_channel.h

patching file examples/legacy_clients.cc

patching file examples/main_program.h

patching file examples/ndadmin.cc

patching file examples/parse_cmd_line.h

patching file examples/sample_clients.cc

patching file examples/sample_functions.cc

patching file examples/some_notify_clients.cc

patching file examples/ten_any_pull_consumers.cc

patching file include/ModFlexLexer.h

patching file lib/RDIParser_l.cc

patching file include/RDIstrstream.h

patching file include/RDITimeWrappers.h

patching file lib/RDIstrstream.cc

patching file lib/RDITimeWrappers.cc

patching file mk/beforeauto.mk.in

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniORB-4.1.6_SRC/build -> ../configure --prefix=/home/develop/salome_6.6.0/omniORB-4.1.6 >> /home/develop/salome_6.6.0/omniORB-4.1.6/CONFIGURE_OMNIORB.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniORB-4.1.6_SRC/build -> make >> /home/develop/salome_6.6.0/omniORB-4.1.6/MAKE_OMNIORB.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniORB-4.1.6_SRC/build -> make install >> /home/develop/salome_6.6.0/omniORB-4.1.6/INSTALL_OMNIORB.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniORBpy-3.6_SRC/build -> ../configure --prefix=/home/develop/salome_6.6.0/omniORB-4.1.6 >> /home/develop/salome_6.6.0/omniORB-4.1.6/CONFIGURE_OMNIORBPY.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniORBpy-3.6_SRC/build -> make >> /home/develop/salome_6.6.0/omniORB-4.1.6/MAKE_OMNIORBPY.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniORBpy-3.6_SRC/build -> make install >> /home/develop/salome_6.6.0/omniORB-4.1.6/INSTALL_OMNIORBPY.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniNotify-2.1_SRC/build -> ../configure --prefix=/home/develop/salome_6.6.0/omniORB-4.1.6 >> /home/develop/salome_6.6.0/omniORB-4.1.6/CONFIGURE_OMNINOTIFY.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniNotify-2.1_SRC/build -> make >> /home/develop/salome_6.6.0/omniORB-4.1.6/MAKE_OMNINOTIFY.LOG

/home/develop/salome_6.6.0/omniORB-4.1.6_SRC/omniNotify-2.1_SRC/build -> make install >> /home/develop/salome_6.6.0/omniORB-4.1.6/INSTALL_OMNINOTIFY.LOG

/home/develop/salome_6.6.0/hdf5-1.8.8_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/hdf5-1.8.8 --disable-debug --enable-production --enable-threadsafe --with-pthread=/usr/include,/usr/lib --with-default-api-version=v16 CFLAGS=-m64 CXXFLAGS=-m64 >> /home/develop/salome_6.6.0/hdf5-1.8.8/CONFIGURE.LOG

/home/develop/salome_6.6.0/hdf5-1.8.8_SRC -> make >> /home/develop/salome_6.6.0/hdf5-1.8.8/MAKE.LOG

/home/develop/salome_6.6.0/hdf5-1.8.8_SRC -> make install >> /home/develop/salome_6.6.0/hdf5-1.8.8/INSTALL.LOG

/home/develop/salome_6.6.0/cgnslib-3.1.3_build -> cmake /home/develop/salome_6.6.0/cgnslib-3.1.3_SRC -DCMAKE_INSTALL_PREFIX:STRING=/home/develop/salome_6.6.0/cgnslib-3.1.3 -DCMAKE_BUILD_TYPE:STRING=Release -DBUILD_SHARED_LIBS:BOOL=ON -DENABLE_HDF5:BOOL=ON -DHDF5_INCLUDE_PATH:PATH=/home/develop/salome_6.6.0/hdf5-1.8.8/include -DHDF5_LIBRARY:FILEPATH=/home/develop/salome_6.6.0/hdf5-1.8.8/lib/libhdf5.so >> /home/develop/salome_6.6.0/cgnslib-3.1.3/CONFIGURE.LOG

/home/develop/salome_6.6.0/cgnslib-3.1.3_build -> make -j4 >> /home/develop/salome_6.6.0/cgnslib-3.1.3/MAKE.LOG

/home/develop/salome_6.6.0/cgnslib-3.1.3_build -> make install >> /home/develop/salome_6.6.0/cgnslib-3.1.3/MAKEINSTALL.LOG

/home/develop/salome_6.6.0/med-3.0.6_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/med-3.0.6 FFLAGS='-g -O2 -ffixed-line-length-none -fPIC' CFLAGS=-m64 CXXFLAGS=-m64 >> /home/develop/salome_6.6.0/med-3.0.6/CONFIGURE.LOG

/home/develop/salome_6.6.0/med-3.0.6_SRC -> make >> /home/develop/salome_6.6.0/med-3.0.6/MAKE.LOG

/home/develop/salome_6.6.0/med-3.0.6_SRC -> make install >> /home/develop/salome_6.6.0/med-3.0.6/INSTALL.LOG

/home/develop/salome_6.6.0/metis-4.0_SRC -> make >> /home/develop/salome_6.6.0/metis-4.0/MAKE.LOG

/home/develop/salome_6.6.0/scotch-5.1.11_SRC/src -> make prefix=/home/develop/salome_6.6.0/scotch-5.1.11 >> /home/develop/salome_6.6.0/scotch-5.1.11/MAKE.LOG

/home/develop/salome_6.6.0/scotch-5.1.11_SRC/src -> make prefix=/home/develop/salome_6.6.0/scotch-5.1.11 install >> /home/develop/salome_6.6.0/scotch-5.1.11/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/ParaView-3.14.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/ParaViewData-3.14.0.tar.gz -C /home/develop/salome_6.6.0

patching file CMakeLists.txt

mkdir: cannot create directory `/home/develop/salome_6.6.0/ParaView-3.14.0_build'

: File exists

/home/develop/salome_6.6.0/ParaView-3.14.0_build -> cmake /home/develop/salome_6.6.0/ParaView-3.14.0_SRC -DCMAKE_INSTALL_PREFIX:STRING=/home/develop/salome_6.6.0/ParaView-3.14.0 -DCMAKE_BUILD_TYPE:STRING=Release -DBUILD_SHARED_LIBS:BOOL=ON -DVTK_HAVE_GETSOCKNAME_WITH_SOCKLEN_T=1 -DCMAKE_CXX_COMPILER:STRING=/usr/bin/g++ -DCMAKE_C_COMPILER:STRING=/usr/bin/gcc -DCMAKE_CXX_FLAGS:STRING=-m64 -DCMAKE_C_FLAGS:STRING=-m64 -DPARAVIEW_INSTALL_DEVELOPMENT:BOOL=ON -DVTK_USE_HYBRID:BOOL=ON -DVTK_USE_GL2PS:BOOL=ON -DVTK_USE_PARALLEL:BOOL=ON -DVTK_USE_PATENTED:BOOL=OFF -DVTK_USE_RENDERING:BOOL=ON -DVTK_USE_64BIT_IDS:BOOL=OFF -DPARAVIEW_BUILD_QT_GUI:BOOL=ON -DVTK_QT_USE_WEBKIT:BOOL=ON -DPARAVIEW_ENABLE_PYTHON:BOOL=ON -DVTK_WRAP_PYTHON:BOOL=ON -DPYTHON_EXECUTABLE:STRING=/home/develop/salome_6.6.0/Python-2.6.6/bin/python2.6 -DPYTHON_INCLUDE_PATH:STRING=/home/develop/salome_6.6.0/Python-2.6.6/include/python2.6 -DPYTHON_LIBRARY:STRING=/home/develop/salome_6.6.0/Python-2.6.6/lib/python2.6/config/libpython2.6.a -DVTK_WRAP_TCL:BOOL=ON -DTCL_INCLUDE_PATH:STRING=/home/develop/salome_6.6.0/tcltk-8.5.8/include -DTCL_LIBRARY:STRING=/home/develop/salome_6.6.0/tcltk-8.5.8/lib/libtcl8.5.so -DTCL_TCLSH:STRING=/home/develop/salome_6.6.0/tcltk-8.5.8/bin/tclsh8.5 -DTK_INCLUDE_PATH:STRING=/home/develop/salome_6.6.0/tcltk-8.5.8/include -DTK_LIBRARY:STRING=/home/develop/salome_6.6.0/tcltk-8.5.8/lib/libtk8.5.so -DTK_WISH:STRING=/home/develop/salome_6.6.0/tcltk-8.5.8/bin/wish8.5 -DVTK_USE_SYSTEM_HDF5:BOOL=ON -DHDF5_INCLUDE_DIR:STRING=/home/develop/salome_6.6.0/hdf5-1.8.8/include -DHDF5_LIBRARY:STRING=/home/develop/salome_6.6.0/hdf5-1.8.8/lib/libhdf5.so -DPARAVIEW_BUILD_PLUGIN_H5PartReader:BOOL=OFF -DPARAVIEW_USE_VISITBRIDGE=ON -DBOOST_ROOT=/home/develop/salome_6.6.0/boost-1.49.0 -DVTK_USE_GL2PS:BOOL=ON -DVTK_USE_SYSTEM_GL2PS:BOOL=ON -DGL2PS_INCLUDE_DIR:STRING=/home/develop/salome_6.6.0/gl2ps-1.3.5/include -DGL2PS_LIBRARY:STRING=/home/develop/salome_6.6.0/gl2ps-1.3.5/lib/libgl2ps.so -DPARAVIEW_BUILD_PLUGIN_CoProcessing:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_Moments:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_Prism:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_SLACTools:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_SierraPlotTools:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_VisTrailsPlugin:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_pvblot:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_CoProcessingScriptGenerator:BOOL=OFF -DPARAVIEW_ENABLE_COPROCESSING:BOOL=OFF -DPARAVIEW_BUILD_PLUGIN_EyeDomeLighting:BOOL=ON -DPARAVIEW_BUILD_PLUGIN_ForceTime:BOOL=ON -DPARAVIEW_BUILD_PLUGIN_H5PartReader:BOOL=ON -DPARAVIEW_BUILD_PLUGIN_PointSprite:BOOL=ON -DPARAVIEW_BUILD_PLUGIN_SurfaceLIC:BOOL=ON >> /home/develop/salome_6.6.0/ParaView-3.14.0/CONFIGURE.LOG

/home/develop/salome_6.6.0/ParaView-3.14.0_build -> make -j4 >> /home/develop/salome_6.6.0/ParaView-3.14.0/MAKE.LOG

/home/develop/salome_6.6.0/ParaView-3.14.0_build -> cpack -G TGZ --config Applications/ParaView/CPackParaView-DevelopmentConfig.cmake >> /home/develop/salome_6.6.0/ParaView-3.14.0/CPACK.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/lapack-3.3.tar.gz -C /home/develop/salome_6.6.0/numpy-1.5.1_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/numpy-1.5.1.tar.gz -C /home/develop/salome_6.6.0/numpy-1.5.1_SRC

/home/develop/salome_6.6.0/numpy-1.5.1_SRC/lapack-3.3_SRC -> cmake . -DCMAKE_CXX_FLAGS=-fPIC -DCMAKE_C_FLAGS=-fPIC -DCMAKE_INSTALL_PREFIX:STRING=/home/develop/salome_6.6.0/numpy-1.5.1_SRC/lapack-3.3_SRC -DBUILD_SHARED_LIBS:BOOL=ON >> /home/develop/salome_6.6.0/numpy-1.5.1/CONFIGURE.LOG

/home/develop/salome_6.6.0/numpy-1.5.1_SRC/lapack-3.3_SRC -> make >> /home/develop/salome_6.6.0/numpy-1.5.1/MAKE.LOG

/home/develop/salome_6.6.0/numpy-1.5.1_SRC/lapack-3.3_SRC -> make install >> /home/develop/salome_6.6.0/numpy-1.5.1/INSTALL.LOG

/home/develop/salome_6.6.0/numpy-1.5.1_SRC/numpy-1.5.1_SRC -> python setup.py install --prefix=/home/develop/salome_6.6.0/numpy-1.5.1 >> /home/develop/salome_6.6.0/numpy-1.5.1/MAKE.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/libBatch-1.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/libBatch-1.6.0_SRC -> cmake -DCMAKE_INSTALL_PREFIX=/home/develop/salome_6.6.0/libBatch-1.6.0 >> /home/develop/salome_6.6.0/libBatch-1.6.0/CONFIGURE.LOG

/home/develop/salome_6.6.0/libBatch-1.6.0_SRC -> make >> /home/develop/salome_6.6.0/libBatch-1.6.0/MAKE.LOG

/home/develop/salome_6.6.0/libBatch-1.6.0_SRC -> make install >> /home/develop/salome_6.6.0/libBatch-1.6.0/INSTALL.LOG

/home/develop/salome_6.6.0/expat-2.0.1_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/expat-2.0.1 >> /home/develop/salome_6.6.0/expat-2.0.1/CONFIGURE.LOG

/home/develop/salome_6.6.0/expat-2.0.1_SRC -> make >> /home/develop/salome_6.6.0/expat-2.0.1/MAKE.LOG

/home/develop/salome_6.6.0/expat-2.0.1_SRC -> make install >> /home/develop/salome_6.6.0/expat-2.0.1/MAKE.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/graphviz-2.28.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/graphviz-2.28.0_SRC -> configure --prefix=/home/develop/salome_6.6.0/graphviz-2.28.0 --disable-rpath -without-qt --with-expat --with-expatincludedir=/home/develop/salome_6.6.0/expat-2.0.1/include --with-expatlibdir=/home/develop/salome_6.6.0/expat-2.0.1/lib --enable-perl=no CFLAGS=-m64 CXXFLAGS=-m64 >> /home/develop/salome_6.6.0/graphviz-2.28.0/CONFIGURE.LOG

/home/develop/salome_6.6.0/graphviz-2.28.0_SRC -> make >> /home/develop/salome_6.6.0/graphviz-2.28.0/MAKE.LOG

/home/develop/salome_6.6.0/graphviz-2.28.0_SRC -> make install >> /home/develop/salome_6.6.0/graphviz-2.28.0/MAKEINSTALL.LOG

patching file src/resize.js

/home/develop/salome_6.6.0/doxygen-1.8.0_SRC -> ./configure --prefix /home/develop/salome_6.6.0/doxygen-1.8.0 --install /usr/bin/install >> /home/develop/salome_6.6.0/doxygen-1.8.0/CONFIGURE.LOG

/home/develop/salome_6.6.0/doxygen-1.8.0_SRC -> make >> /home/develop/salome_6.6.0/doxygen-1.8.0/MAKE.LOG

/home/develop/salome_6.6.0/doxygen-1.8.0_SRC -> make install >> /home/develop/salome_6.6.0/doxygen-1.8.0/MAKEINSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/docutils-0.8.1.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/docutils-0.8.1_SRC -> python setup.py install --prefix=/home/develop/salome_6.6.0/docutils-0.8.1 >> /home/develop/salome_6.6.0/docutils-0.8.1/BUILD.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/Sphinx-1.1.3.tar.gz -C /home/develop/salome_6.6.0/Sphinx-1.1.3_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/setuptools-0.6c11.tar.gz -C /home/develop/salome_6.6.0/Sphinx-1.1.3_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/Jinja2-2.6.tar.gz -C /home/develop/salome_6.6.0/Sphinx-1.1.3_SRC

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/Pygments-1.5.tar.gz -C /home/develop/salome_6.6.0/Sphinx-1.1.3_SRC

/home/develop/salome_6.6.0/Sphinx-1.1.3_SRC/setuptools-0.6c11_SRC -> python ./setup.py install --prefix=/home/develop/salome_6.6.0/Sphinx-1.1.3 >> /home/develop/salome_6.6.0/Sphinx-1.1.3/MAKE.LOG

/home/develop/salome_6.6.0/Sphinx-1.1.3_SRC/Pygments-1.5_SRC -> python ./setup.py install --prefix=/home/develop/salome_6.6.0/Sphinx-1.1.3 >> /home/develop/salome_6.6.0/Sphinx-1.1.3/MAKE.LOG

/home/develop/salome_6.6.0/Sphinx-1.1.3_SRC/Jinja2-2.6_SRC -> python ./setup.py install --prefix=/home/develop/salome_6.6.0/Sphinx-1.1.3 >> /home/develop/salome_6.6.0/Sphinx-1.1.3/MAKE.LOG

/home/develop/salome_6.6.0/Sphinx-1.1.3_SRC/Sphinx-1.1.3_SRC -> python ./setup.py install --prefix=/home/develop/salome_6.6.0/Sphinx-1.1.3 >> /home/develop/salome_6.6.0/Sphinx-1.1.3/MAKE.LOG

patching file libsrc/meshing/meshtype.cpp

patching file libsrc/meshing/meshtype.hpp

patching file libsrc/meshing/smoothing2.cpp

patching file libsrc/occ/occconstruction.cpp

patching file libsrc/occ/occgenmesh.cpp

patching file libsrc/occ/occgeom.cpp

patching file libsrc/occ/occgeom.hpp

patching file libsrc/occ/occmeshsurf.cpp

patching file libsrc/occ/Partition_Inter3d.cxx

patching file libsrc/occ/Partition_Loop2d.cxx

patching file libsrc/occ/Partition_Loop.cxx

patching file libsrc/occ/Partition_Spliter.cxx

patching file libsrc/occ/utilities.h

patching file libsrc/stlgeom/stlgeommesh.cpp

patching file nglib/nglib.h

/home/develop/salome_6.6.0/netgen-4.9.13_SRC -> make >> /home/develop/salome_6.6.0/netgen-4.9.13/MAKE.LOG

/home/develop/salome_6.6.0/netgen-4.9.13_SRC -> make install >> /home/develop/salome_6.6.0/netgen-4.9.13/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/BINARIES/Red_Hat_Enterprise_WS_4_64bit/DISTENE.tar.gz -C /home/develop/salome_6.6.0/DISTENE

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/BINARIES/Red_Hat_Enterprise_WS_4_64bit/homard-10.5.tar.gz -C /home/develop/salome_6.6.0/homard-10.5

patching file libxml.h

/home/develop/salome_6.6.0/libxml2-2.7.8_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/libxml2-2.7.8 >> /home/develop/salome_6.6.0/libxml2-2.7.8/CONFIGURE.LOG

/home/develop/salome_6.6.0/libxml2-2.7.8_SRC -> make >> /home/develop/salome_6.6.0/libxml2-2.7.8/MAKE.LOG

/home/develop/salome_6.6.0/libxml2-2.7.8_SRC -> make install >> /home/develop/salome_6.6.0/libxml2-2.7.8/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/KERNELsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 KERNEL

>>> The following modules will be built:

KERNEL

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 12:35:38 EST 2013

===========================================================================

>>> Processing KERNEL module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/KERNEL_6.6.0

... Performing make install

>>> Finished KERNEL module

===========================================================================

SALOME build finished at Sun Feb 17 12:55:58 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/GUIsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 GUI

>>> The following modules will be built:

GUI

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 12:56:15 EST 2013

===========================================================================

>>> Processing GUI module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/GUI_6.6.0

... Performing make install

>>> Finished GUI module

===========================================================================

SALOME build finished at Sun Feb 17 13:34:32 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/GEOMsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 GEOM

>>> The following modules will be built:

GEOM

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 13:34:50 EST 2013

===========================================================================

>>> Processing GEOM module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/GEOM_6.6.0

... Performing make install

>>> Finished GEOM module

===========================================================================

SALOME build finished at Sun Feb 17 14:56:59 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/MEDsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 MED

>>> The following modules will be built:

MED

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 14:57:21 EST 2013

===========================================================================

>>> Processing MED module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/MED_6.6.0

... Performing make install

>>> Finished MED module

===========================================================================

SALOME build finished at Sun Feb 17 15:42:29 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/SMESHsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 SMESH

>>> The following modules will be built:

SMESH

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 15:42:56 EST 2013

===========================================================================

>>> Processing SMESH module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/SMESH_6.6.0

... Performing make install

>>> Finished SMESH module

===========================================================================

SALOME build finished at Sun Feb 17 16:45:18 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/VISUsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 VISU

>>> The following modules will be built:

VISU

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 16:45:33 EST 2013

===========================================================================

>>> Processing VISU module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/VISU_6.6.0

... Performing make install

>>> Finished VISU module

===========================================================================

SALOME build finished at Sun Feb 17 17:17:58 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/PARAVISsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 PARAVIS

>>> The following modules will be built:

PARAVIS

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 17:18:13 EST 2013

===========================================================================

>>> Processing PARAVIS module

... Performing build_configure

!!! Warning !!! build_configure step is not executed for PARAVIS.

... Performing configure

... Performing make

make[2]: *** [src/Plugins/MedReader/IO/libvtkMedReader.so] Error 1

make[1]: *** [src/Plugins/MedReader/IO/CMakeFiles/vtkMedReader.dir/all] Error 2

make: *** [all] Error 2

>>> Finished PARAVIS module

===========================================================================

SALOME build finished at Sun Feb 17 18:32:16 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/HEXABLOCKsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 HEXABLOCK

>>> The following modules will be built:

HEXABLOCK

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 18:37:47 EST 2013

===========================================================================

>>> Processing HEXABLOCK module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/HEXABLOCK_6.6.0

... Performing make install

>>> Finished HEXABLOCK module

===========================================================================

SALOME build finished at Sun Feb 17 18:53:24 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/HEXABLOCKPLUGINsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 HEXABLOCKPLUGIN

>>> The following modules will be built:

HEXABLOCKPLUGIN

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 18:54:02 EST 2013

===========================================================================

>>> Processing HEXABLOCKPLUGIN module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/HEXABLOCKPLUGIN_6.6.0

... Performing make install

>>> Finished HEXABLOCKPLUGIN module

===========================================================================

SALOME build finished at Sun Feb 17 18:59:46 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/NETGENPLUGINsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 NETGENPLUGIN

>>> The following modules will be built:

NETGENPLUGIN

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 19:00:25 EST 2013

===========================================================================

>>> Processing NETGENPLUGIN module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/NETGENPLUGIN_6.6.0

... Performing make install

>>> Finished NETGENPLUGIN module

===========================================================================

SALOME build finished at Sun Feb 17 19:13:53 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/GHS3DPLUGINsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 GHS3DPLUGIN

>>> The following modules will be built:

GHS3DPLUGIN

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 19:14:11 EST 2013

===========================================================================

>>> Processing GHS3DPLUGIN module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/GHS3DPLUGIN_6.6.0

... Performing make install

>>> Finished GHS3DPLUGIN module

===========================================================================

SALOME build finished at Sun Feb 17 19:24:06 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/GHS3DPRLPLUGINsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 GHS3DPRLPLUGIN

>>> The following modules will be built:

GHS3DPRLPLUGIN

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 19:24:27 EST 2013

===========================================================================

>>> Processing GHS3DPRLPLUGIN module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/GHS3DPRLPLUGIN_6.6.0

... Performing make install

>>> Finished GHS3DPRLPLUGIN module

===========================================================================

SALOME build finished at Sun Feb 17 19:34:50 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/BLSURFPLUGINsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 BLSURFPLUGIN

>>> The following modules will be built:

BLSURFPLUGIN

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 19:35:11 EST 2013

===========================================================================

>>> Processing BLSURFPLUGIN module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/BLSURFPLUGIN_6.6.0

... Performing make install

>>> Finished BLSURFPLUGIN module

===========================================================================

SALOME build finished at Sun Feb 17 19:51:55 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/HexoticPLUGINsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 HexoticPLUGIN

>>> The following modules will be built:

HexoticPLUGIN

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 19:52:16 EST 2013

===========================================================================

>>> Processing HexoticPLUGIN module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/HexoticPLUGIN_6.6.0

... Performing make install

>>> Finished HexoticPLUGIN module

===========================================================================

SALOME build finished at Sun Feb 17 20:02:06 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/COMPONENTsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 COMPONENT

>>> The following modules will be built:

COMPONENT

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:02:20 EST 2013

===========================================================================

>>> Processing COMPONENT module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/COMPONENT_6.6.0

... Performing make install

>>> Finished COMPONENT module

===========================================================================

SALOME build finished at Sun Feb 17 20:08:55 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/PYCALCULATORsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 PYCALCULATOR

>>> The following modules will be built:

PYCALCULATOR

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:09:08 EST 2013

===========================================================================

>>> Processing PYCALCULATOR module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/PYCALCULATOR_6.6.0

... Performing make install

>>> Finished PYCALCULATOR module

===========================================================================

SALOME build finished at Sun Feb 17 20:10:34 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/CALCULATORsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 CALCULATOR

>>> The following modules will be built:

CALCULATOR

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:10:53 EST 2013

===========================================================================

>>> Processing CALCULATOR module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/CALCULATOR_6.6.0

... Performing make install

>>> Finished CALCULATOR module

===========================================================================

SALOME build finished at Sun Feb 17 20:12:25 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/HELLOsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 HELLO

>>> The following modules will be built:

HELLO

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:12:38 EST 2013

===========================================================================

>>> Processing HELLO module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/HELLO_6.6.0

... Performing make install

>>> Finished HELLO module

===========================================================================

SALOME build finished at Sun Feb 17 20:15:28 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/PYHELLOsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 PYHELLO

>>> The following modules will be built:

PYHELLO

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:15:50 EST 2013

===========================================================================

>>> Processing PYHELLO module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/PYHELLO_6.6.0

... Performing make install

>>> Finished PYHELLO module

===========================================================================

SALOME build finished at Sun Feb 17 20:17:29 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/ATOMGENsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 ATOMGEN

>>> The following modules will be built:

ATOMGEN

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:17:48 EST 2013

===========================================================================

>>> Processing ATOMGEN module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/ATOMGEN_6.6.0

... Performing make install

>>> Finished ATOMGEN module

===========================================================================

SALOME build finished at Sun Feb 17 20:19:18 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/ATOMSOLVsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 ATOMSOLV

>>> The following modules will be built:

ATOMSOLV

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:19:35 EST 2013

===========================================================================

>>> Processing ATOMSOLV module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/ATOMSOLV_6.6.0

... Performing make install

>>> Finished ATOMSOLV module

===========================================================================

SALOME build finished at Sun Feb 17 20:22:46 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/ATOMICsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 ATOMIC

>>> The following modules will be built:

ATOMIC

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:23:13 EST 2013

===========================================================================

>>> Processing ATOMIC module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/ATOMIC_6.6.0

... Performing make install

>>> Finished ATOMIC module

===========================================================================

SALOME build finished at Sun Feb 17 20:26:14 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/LIGHTsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 LIGHT

>>> The following modules will be built:

LIGHT

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:26:32 EST 2013

===========================================================================

>>> Processing LIGHT module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/LIGHT_6.6.0

... Performing make install

>>> Finished LIGHT module

===========================================================================

SALOME build finished at Sun Feb 17 20:28:19 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/PYLIGHTsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 PYLIGHT

>>> The following modules will be built:

PYLIGHT

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:28:35 EST 2013

===========================================================================

>>> Processing PYLIGHT module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/PYLIGHT_6.6.0

... Performing make install

>>> Finished PYLIGHT module

===========================================================================

SALOME build finished at Sun Feb 17 20:29:37 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/RANDOMIZERsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 RANDOMIZER

>>> The following modules will be built:

RANDOMIZER

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:29:51 EST 2013

===========================================================================

>>> Processing RANDOMIZER module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/RANDOMIZER_6.6.0

... Performing make install

>>> Finished RANDOMIZER module

===========================================================================

SALOME build finished at Sun Feb 17 20:31:00 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/SIERPINSKYsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 SIERPINSKY

>>> The following modules will be built:

SIERPINSKY

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:33:33 EST 2013

===========================================================================

>>> Processing SIERPINSKY module

... Performing build_configure

... Performing configure

... Performing make

make[2]: *** [libSIERPINSKYEngine_la-SIERPINSKY_Gen_i.lo] Error 1

make[1]: *** [all-recursive] Error 1

make: *** [all-recursive] Error 1

>>> Finished SIERPINSKY module

===========================================================================

SALOME build finished at Sun Feb 17 20:36:40 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/YACSsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 YACS

>>> The following modules will be built:

YACS

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:36:59 EST 2013

===========================================================================

>>> Processing YACS module

... Performing build_configure

... Performing configure

... Performing make

>>> Finished YACS module

===========================================================================

SALOME build finished at Sun Feb 17 20:37:59 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/YACSGENsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/YACSGEN_SRC_6.6.0 -> python ./setup.py install --prefix=/home/develop/salome_6.6.0/YACSGEN_6.6.0 >> /home/develop/salome_6.6.0/YACSGEN_6.6.0/MAKE.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/JOBMANAGERsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 JOBMANAGER

>>> The following modules will be built:

JOBMANAGER

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:38:37 EST 2013

===========================================================================

>>> Processing JOBMANAGER module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/JOBMANAGER_6.6.0

... Performing make install

>>> Finished JOBMANAGER module

===========================================================================

SALOME build finished at Sun Feb 17 20:44:38 EST 2013

===========================================================================

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/SAMPLESsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/TUTORIALsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/HOMARDsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0 -> ./build.sh -o -b -d -v 0 -p /home/develop/salome_6.6.0 HOMARD

>>> The following modules will be built:

HOMARD

>>> Setting environment

===========================================================================

Starting SALOME build at Sun Feb 17 20:45:13 EST 2013

===========================================================================

>>> Processing HOMARD module

... Performing build_configure

... Performing configure

... Performing make

... Removing /home/develop/salome_6.6.0/HOMARD_6.6.0

... Performing make install

>>> Finished HOMARD module

===========================================================================

SALOME build finished at Sun Feb 17 20:51:42 EST 2013

===========================================================================

/home/develop/salome_6.6.0/xdata-0.9.6_SRC -> ./configure --prefix=/home/develop/salome_6.6.0/xdata-0.9.6 >> /home/develop/salome_6.6.0/xdata-0.9.6/CONFIGURE.LOG

/home/develop/salome_6.6.0/xdata-0.9.6_SRC -> make >> /home/develop/salome_6.6.0/xdata-0.9.6/MAKE.LOG

/home/develop/salome_6.6.0/xdata-0.9.6_SRC -> make install >> /home/develop/salome_6.6.0/xdata-0.9.6/INSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/HXX2SALOMEsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/salome_6.6.0/HXX2SALOME_SRC_6.6.0 -> ./build_configure >> /home/develop/salome_6.6.0/HXX2SALOME_6.6.0/CONFIGURE.LOG

/home/develop/salome_6.6.0/HXX2SALOME_SRC_6.6.0 -> ./configure --prefix=/home/develop/salome_6.6.0/HXX2SALOME_6.6.0 >> /home/develop/salome_6.6.0/HXX2SALOME_6.6.0/CONFIGURE.LOG

/home/develop/salome_6.6.0/HXX2SALOME_SRC_6.6.0 -> make >> /home/develop/salome_6.6.0/HXX2SALOME_6.6.0/MAKE.LOG

/home/develop/salome_6.6.0/HXX2SALOME_SRC_6.6.0 -> make install >> /home/develop/salome_6.6.0/HXX2SALOME_6.6.0/MAKEINSTALL.LOG

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/HXX2SALOMEDOCsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0

/home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/config_files -> tar xfz /home/develop/Downloads/InstallWizard_6.6.0_Red_Hat_Enterprise_WS_4_64bit/Products/SOURCES/DOCUMENTATIONsourcesV6.6.0.tar.gz -C /home/develop/salome_6.6.0