Personal tools
You are here: Home Forum Install & build V6.3.1 Notebook problem

V6.3.1 Notebook problem

Up to Install & build

V6.3.1 Notebook problem

Posted by Cacciatorino at December 15. 2011

Salome V6.3.1 on Fedora Core 16 x64.

 

If I define one or more variables n the notebook, it works as expected, but when I try to apply variables to model dimensions, a window error appears:

 

"SalomeException: Server unreachable",

 

while the shell window shows this text:

[code]

*******************
*    Warning: library libCOMPONENT.so cannot be found
*    Module Component will not be available in GUI mode
****************************************************************

th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/GUI_V6_3_1/src/LightApp/LightApp_Application.cxx [3341] : ****************************************************************
*    Warning: library libCALCULATOR.so cannot be found
*    Module Calculator will not be available in GUI mode
****************************************************************

th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/GUI_V6_3_1/src/LightApp/LightApp_Application.cxx [3341] : ****************************************************************
*    Warning: library libPYCALCULATOR.so cannot be found
*    Module PyCalculator will not be available in GUI mode
****************************************************************

th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/KERNEL_V6_3_1p1/src/NamingService/SALOME_NamingService.cxx [403] : Resolve():CORBA::SystemException : unable to contactthe naming service
th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/KERNEL_V6_3_1p1/src/NamingService/SALOME_NamingService.cxx [403] : Resolve():CORBA::SystemException : unable to contactthe naming service
th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/KERNEL_V6_3_1p1/src/NamingService/SALOME_NamingService.cxx [1541] : CORBA::SystemException: unable to contact the naming service
th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/KERNEL_V6_3_1p1/src/NamingService/SALOME_NamingService.cxx [403] : Resolve():CORBA::SystemException : unable to contactthe naming service
th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/KERNEL_V6_3_1p1/src/NamingService/SALOME_NamingService.cxx [403] : Resolve():CORBA::SystemException : unable to contactthe naming service
th. 139859930548160 - Trace /local01/salome/V6_3_1/modules/src/KERNEL_V6_3_1p1/src/NamingService/SALOME_NamingService.cxx [403] : Resolve():CORBA::SystemException : unable to contactthe naming service

[/code]

 

Now I'm unable to find this libPYCALCULATOR.so, where can I look for it?

Re: V6.3.1 Notebook problem

Posted by DAVID Gilles at December 15. 2011

The PYCALCULATOR module is not your problem here.

You can safely ignore the warnings about modules not available in GUI mode. It just means what it is written: those module won't be available in GUI ;)

 

Concerning your problem, I suspect a network problem: "unable to contactthe naming service"

It's hard to tell more at this stage.

 

Gilles

Re: V6.3.1 Notebook problem

Posted by Cacciatorino at December 15. 2011

You are right, it was enough to add a line:

 

127.0.0.1 hostname (hostname is to be intended as the current hostname of the current computer, of course)

 

to the /etc/hosts file.

 

to have Salome running, without the modification to the file nameserver.py that was indicated here in the forum.

 

The notebook works normally now.

 

Thank you.

 

Previously DAVID Gilles wrote:

The PYCALCULATOR module is not your problem here.

You can safely ignore the warnings about modules not available in GUI mode. It just means what it is written: those module won't be available in GUI ;)

 

Concerning your problem, I suspect a network problem: "unable to contactthe naming service"

It's hard to tell more at this stage.

 

Gilles

 

Re: V6.3.1 Notebook problem

Posted by Ahmed BELLIL at December 19. 2011

bonjour , 

je souhaiterai installer SALOME, mais j'ai aucune aidée comment faire s'il vous plait 

bon j'ai téléchargé la version 6.0 64bit ensuite j'ai décompressé le ficher maintenant je ne sais pas quoi faire 

quelqu'un peut m'expliqué s'il vous plait. 

merci 

Oran

  

Powered by Ploneboard
Document Actions