Personal tools
You are here: Home Forum Use reduce number of edges of a face being part of a solid

reduce number of edges of a face being part of a solid

Up to Use

reduce number of edges of a face being part of a solid

Posted by kathi blum at July 25. 2020

hello

I want to create a HEX-mesh of a revolve-symmetric body, using algo "Extrusion3D" and a submesh on 1 of the 2 lateral faces. See picture.

It fails and I detected that the inner cylindrical surface does not contain 4 curves (base and top of extrusion, and 2 "along-extrusion-curves") as it should be. But the base (or top) curve is split in 2 colinear curves, so the surface is composed of 5 curves

What is the best way to repair this surface to make it consist of the only 4 curves as needed?

I looked in the Geom module to the repair menu but did not find what i need. I should need something simila as "Fuse coincident edges within a wire", but it seem applicable only to a "Standalone-wire"

many thanks in advance for your help

kathi

Attachments

Re: reduce number of edges of a face being part of a solid

Posted by Saint Michael at July 27. 2020

Hi Kathi

Repair > Remove extra edges should help you

St.Michael

Powered by Ploneboard
Document Actions